ETCR6450 Clamp Multimeter -etcr

ETCR6450 Clamp Multimeter

Product Main Function

Measurement of DC current and voltage、AC current & voltage true RMS, resistance, surge, capacitance, frequency, on-off test, temperature, diode forward voltage drop and others parameters. 

Clamp Size:Ф52mm

DC Voltage:0mV~1000V

AC Voltage:0mV-700V

DC Current:0A~1000A

AC Current: 0A-1000A

Resistance:  0Ω~40MΩ

Capacitance:0nF~10mF

Frequency: 0Hz~40MHz

     ETCR6450 Clamp Multimeter is a new generation of practical electrical measurement instrument with excellent performance which carefully developed by our company. The instrument adopts the high performance new type MCU processor, and with the extremely high cost-effective, it also has the high reliability, high safety, automatic measuring range, the hand-held clamp meter and so on characteristic .Has a large screen digital, full range overload protection, data hold, undervoltage indication, automatic shutdown function, true RMS measurement can accurately measure frequency voltage, non sinusoidal voltage, and the surge current can measure the surge current RMS for measurement cycle is 80ms, and equipped with accurate measuring - 50 ~ 1000℃temperature measurement function, and this instrument is very suitable for variable frequency power supply, air conditioning and refrigerator and others refrigeration equipment,  and motor performance testing, etc., DC40A, 400A, 1000A DC current range  function is widely used in electroplating, dc welding machine, auto detection and all kinds of DC current measurement occasions which over 500mA.



   1. Clamp

   2.Trigger

   3. SELECTfunction selection key(Press this key continuously to loop through all functions of gear.)

   4 RANGE manual range key: When need to fixed one of measurement range, can use the manual range function

   5. Display LCD

   6. “COM” commond input terminal(input grouding)

   7.Rotary switch: use for selecting current, voltage, resistance, capacitance, temperature, frequency, forward voltage drop for diode and on-off test function.

   8. DH reading hold key: press this key can lock present reading value, and display “DH”symbol in the same time, press this key again to cancel the hold function, and the “DH” symbol disappear.

   9.ZERO DC current gear display zero clearing key: When the DC current range is not measured but the number is not zero, press this key  to zero and then measurement. INRUSH surge voltage and current key: in AC gear , press the key to measure surge value, and display "INR" symbol at the same time, the surge mode can measure the minimum cycle is 80 ms of the surge current or voltage RMS, enter the surge mode, the instrument automatically enter into manual measurement range, when cannot evaluate the measured value, please press the RANGE key and select the largest range and then make the surge measurement.Press this key again to cancel the surge measurement function, and the "INR" symbol disappears.

  10. “VW” voltage-resistance-frequency-temperature-capacitance-diode input plug.

  11.Temperature transducerX1PCS

  12. ProbeX2PCS




Basic function

DC Voltage

400m/4/40/400/1000V                             ±(0.8%+2)

AC Voltage

400m/4/40/400/700V                                ±(1.2%+5)

DC Current

10A/400A/1000A                                      ±(2%+5)

AC Current

40A/400A/1000A                                       ±(2%+5)

Resistance

400/4k/40k/400k/4M/40MΩ                        ±(1%+3)

Capacitance

10n/100n/1u/10u/100uF/1000uF/10mF      ±(3%+5)

Frequency

10/100/1k/10k/100k/1M/10m/40MHz          ±(0.5%+3)

Temperature

-50°C~1000°C                                           ±(1%+5)

Special function

Auto Range

ManualRange

AC ConversionType

True RMS

InputProtection

 

Auto Shutdown

about 10 minutes, can be setand cancel auto shutdown function

Diode Test

Can measure the LED work voltage below 3V

Duty Ratio Measurement

Voltage Frequency Measurement

NCV(Live line)Measurement

Short Circuit Buzzer

LowVoltageIndicator

Input Impedance

about10MΩ

Data Hold

Surge Signal Measurement

CT Size

Ф52mm

General features

Power Supply

6F22  9VX1

Meter Weight

360g(with battery)

Meter Dimension

249X89X38mm

Accessories

Tester:1pcs ; Pen probe:1set;Temperature sensor:1set;Meter Bag:1pcs

Model

CT 

DC Voltage

AC Voltage

DC Current

AC Current

Resistance

ETCR6420

Ф27mm

0mV-600V

0V-600V

/

0A-600A

0Ω-40MΩ

ETCR6450

Ф52mm

0mV-1000V 

0mV-700V

0A-1000A

0A-1000A

0Ω-40MΩ

ETCR6470

Ф55mm

0V - 2000V

0V - 2000V

/

0A-2000A

0Ω-20MΩ


Package

 Outer Package

 Carton

 Inner Package

 Cloth bag

 Accessory

 Meter

 1 PCS

 Pen probe

 1 PCS

 Temperature sensor

1 PCS

 Manual

 1 PCS

 Certification

 1 PCS

 Warranty Card

 1 PCS


ETCR6450 Clamp Multimeter Catalog